Private Mould or Library Mould? How a New Perfume Brand Can Launch Without Tooling Cost

• The short version A new fragrance brand has two ways to get its cap, bottle and box made. A private mould gives you a shape no one else can order, in exchange for a tooling investment and a development stage. A library mould uses a classic public shape the factory already has, which JinDi states lets a new brand avoid tooling cost entirely at launch. JinDi perfume packaging supports both routes, supplies all three components as one matched set on one quotation and one invoice, and states a physical sample of cap, bottle and box in 15 business days. MOQ is typically 5,000 to 10,000 pieces for custom components, and can be negotiated for niche projects through a support programme for emerging brands.

What is JinDi perfume packaging, and who makes the parts?

JinDi is the integrated packaging division of Dongguan Dizhong Hardware Product Co., Ltd. Dizhong was founded in Dongguan in 2007 and started with zamac caps. The JinDi division handles design consultation and end-to-end delivery, so a brand receives the cap, the bottle and the box as one complete set and works with one project manager throughout.

The hardware is made in Dizhong's own 10,000㎡ facility in Dongguan, where mould design, die-casting, CNC, polishing, electroplating and injection moulding all run under one roof. Glass bottles and gift boxes are supplied as part of the same integrated range. For a mould decision this matters: the site states that in-house tooling capability means Dizhong never waits on a third party to make a mould, so the people quoting the tool are the people who build it.

Private mould or library mould: what is the actual difference?

A mould is the tool that gives a cap or a bottle its shape. Every die-cast cap and every glass bottle comes out of one. The question for a new brand is whether that tool is made for you, or whether it already exists and you order parts from it.

A private mould is designed and made for your shape. In general practice it gives you a form competitors cannot order, but it adds a design and tooling stage before the first sample, plus an upfront cost that is spread over your production volume.

A library mould, also called a public mould, is an existing tool from the factory's collection of classic shapes. Because the tool already exists, there is no new mould to design or pay for. The trade-off is exclusivity: a public shape can be ordered by other brands too.

• Shape Private mould: Your own design, developed from a concept, sketch or reference image · Library mould: A classic public shape from JinDi's existing library
• Exclusivity Private mould: Exclusive to your brand; every JinDi client signs an NDA and unauthorised use of any client mould is strictly prohibited · Library mould: Not exclusive; the same shape is open to other buyers
• Tooling cost at launch Private mould: A tooling investment; ask for it as a separate line on the quotation · Library mould: None, according to JinDi: a new brand can avoid tooling cost entirely
• Lead time Private mould: In general practice, 3D modelling, approval and mould-making come before the sample · Library mould: Starts from an existing tool, so there is no new mould to make
• Differentiation Private mould: Built into the silhouette itself · Library mould: Comes from finish, colour, decoration and the box
• Tooling ownership Private mould: Agree ownership, storage and reuse terms in writing before tooling starts · Library mould: The tool stays in the factory's library; you buy the parts it makes
• Typical fit Private mould: A signature shape central to the brand story, with the volume to carry the tooling · Library mould: A first launch, a test market, or a brand putting its budget into the fragrance and marketing

Why tooling ownership deserves a line in the contract

In general industry practice, who owns a private mould, where it is stored and whether it can be moved or reused are contract questions, not assumptions. JinDi's stated policy covers the confidentiality side: every client signs a formal Non-Disclosure Agreement, and unauthorised use of any client mould is strictly prohibited. Ask for the ownership and storage terms in writing alongside the tooling quotation, so the answer is on paper before the mould is made.

How does the private mould route work at JinDi?

The site describes the private mould route in a fixed sequence. Each step below follows JinDi's own wording, so you know what to prepare and what to expect back.

• Brief: send a concept, a sketch or a reference image, together with your quantities. JinDi states a response within 24 hours.
• 3D modelling: the JinDi division builds the model and returns 3D renders for approval.
• Recommendations: material matching and structural optimisation advice, with material specs and surface finish mockups.
• Fit check: because the cap and the bottle are engineered together, cap-to-neck fit is validated at the mould stage rather than discovered on the filling line.
• Tooling: the Dizhong mould department takes the approved design to production, under NDA.
• Sample: a physical sample of cap, bottle and box, stated at 15 business days.
• Production: a full run with inline QC and CMM verification, stated at 30 to 45 days.
• Delivery: the full set packed and shipped EXW, FOB Shenzhen or Guangzhou, CIF or DDP.

The 3D stage is where most of the lasting decisions are made, because anything designed into the tool is fixed for every piece that comes out of it. JinDi lists custom shape, weight and neck geometry for bottles, and magnetic closure structures, composite metal-and-wood or metal-and-leather caps, and PP or Surlyn inner liners for caps. If you want any of these, put them in the brief so they are designed into the mould rather than requested after it exists.

• Confirm the sample date for a new mould The 15-business-day sample figure appears across the site for cap, bottle and box. When your project includes a new private mould, ask JinDi to confirm the sample date for your specific parts on the quotation, next to the tooling line. The estimator on the contact page also asks whether you will use a stock mould or a new private mould, and its results are marked as indicative only, subject to confirmation.

How does a new brand launch on library moulds without tooling cost?

The library route skips the tooling stage. You choose classic public moulds for the components, and the development work goes into how they are finished and decorated. JinDi states that this lets a new brand avoid tooling cost entirely at launch, which frees budget for stock, launch marketing or a better box.

A shared shape does not have to look shared. On the same base form, brands usually set themselves apart through surface, colour and decoration. JinDi lists the following options across the three components; ask which of them apply to the library shapes you pick.

• Cap finishes: 24K gold, brushed silver, rose gold, gunmetal black, matte, or a fully custom colour system, plated in-house by vacuum plating and eco-friendly wet electroplating.
• Aluminium caps: the aluminium cylinder cap in the range is listed as anodised in any RAL colour.
• Bottle glass: lead-free crystal and borosilicate.
• Bottle decoration: spray coating, sandblasting, silk screen printing, UV printing, hot stamping, branding and hand labelling.
• Box materials: rigid board, velvet and leatherette, with magnetic closures, ribbon pulls, foil embossing, deboss detailing and custom-fitted inserts.
• Box formats: magnetic mailer, sliding drawer, lift-off lid, flip-lid, hinged presentation case, tiered reveal, silk-lined casket and multi-panel vault.

Where to start looking at shapes

The site publishes its existing range: nine cap styles (eight in the Zamac Collection and one aluminium cylinder), five bottle formats in the Glass Collection, one of which is a multi-style collection of 20+ shapes including fan-top, dome, rectangular and oval silhouettes, and nine gift box formats. The site does not say which of these are public library moulds, so treat the range as a visual reference and ask the team for the library options that match your bottle and cap style.

• Spend the saved tooling budget where customers look If you take the library route, put part of the money you did not spend on tooling into the cap finish and the box, the two parts a customer handles first. A custom plating colour on a classic cap, or a magnetic rigid box with a fitted insert, changes how a shared shape reads on the shelf.

Which route fits your launch?

There is no universally right answer. It depends on what the brand is selling and how confident you are in the volume. These questions usually settle it:

• Is the shape itself the brand signature? If the silhouette is what customers will recognise, a private mould protects it.
• How firm is the first-order volume? Tooling cost is spread across units, so it weighs heaviest on a small first run.
• How fixed is the launch date? A library mould takes the design-and-tooling stage off the critical path.
• Is this a test? A first launch or a new market can start on library moulds and move to a private mould once demand is proven.
• Where does your differentiation come from? If it is the finish, the colour or the box, a library shape may be all you need.

A split decision is also possible in principle: a private cap on a library bottle, or the other way round, gives one distinctive element without tooling every part. Ask JinDi whether the combination works for your set, because the cap-to-neck fit still has to be validated.

What stays the same on both routes?

The mould decision changes the shape and the upfront cost. Most of what JinDi states about supply, quality and shipping applies to the set either way:

• Supply What JinDi states: Cap, bottle and box as one matched set, on one quotation and one invoice, with a dedicated project manager for every brand
• Fit What JinDi states: Cap-to-neck fit validated at the mould stage; every production batch has to achieve a perfect bite between cap and bottle neck
• Sample What JinDi states: Physical sample of cap, bottle and box in 15 business days
• Production What JinDi states: 30 to 45 days, with inline QC and CMM verification
• Inspection What JinDi states: CMM measurement equipment, 100% outgoing inspection, AQL 1.0/2.5, and client-appointed third-party inspection such as SGS supported
• Shipping What JinDi states: EXW, FOB Shenzhen or Guangzhou, CIF and DDP, with Middle East DDP express supported
• Documents What JinDi states: Certificate of Origin, packing list, commercial invoice and export compliance papers

What does MOQ look like for an emerging brand?

JinDi states that MOQ is typically 5,000 to 10,000 pieces for custom components, depending on the specific process, and that it can be negotiated for niche projects through a support programme for emerging brands. The site does not publish the programme's terms, so raise it in your first enquiry with realistic volumes rather than at quotation stage.

The two decisions interact. A private mould's tooling cost is spread across every piece made from it, so the smaller the run, the more of that cost each unit carries. That is the general reason library moulds are popular for first launches, and why the MOQ and the mould route are best discussed together.

• Compliance paperwork is route-independent Whichever route you choose, the compliance documents are the same. JinDi lists BSCI social audit certification through SGS and amfori, FSC Chain-of-Custody through SGS Hong Kong, and RoHS compliance certification, with full certificate PDFs and audit reports available to your compliance contact on request.

What should you send with your first enquiry?

• Route: private mould, library mould, or both quoted side by side.
• Concept: a sketch, reference image or concept for anything new.
• Components: cap, bottle and box, and whether you need spray pumps and collars, which are supplied in the same range.
• Bottle: glass type, any weight target and the cap style it has to take.
• Finish: cap finish and bottle decoration references.
• Volumes: first-order quantity, expected repeat volume, and whether you want to discuss the emerging-brand programme.
• Shipping: preferred Incoterm and destination.

Asking for both routes quoted side by side is the quickest way to see what exclusivity actually costs on your project, and whether the launch can start on library moulds and move to a private mould later.

Get both routes quoted

Send your concept or reference image, quantities and destination to the JinDi team in Dongguan. They reply within 24 hours. Ask for a private-mould and a library-mould quotation side by side for the same cap, bottle and box set.

Frequently Asked Questions

• What is a library mould in perfume packaging? A library mould, or public mould, is an existing tool from a factory's collection of classic shapes. Because the tool already exists, you order parts from it instead of paying for a new mould. JinDi states that choosing from its library of classic public moulds lets a new brand avoid tooling cost entirely at launch. The shape is not exclusive to you.
• Does a private mould developed with JinDi stay exclusive to my brand? JinDi states that every client signs a formal Non-Disclosure Agreement and that unauthorised use of any client mould is strictly prohibited. Private moulds are developed under NDA and taken to production by the Dizhong mould department. Agree ownership and storage terms in writing alongside the tooling quotation.
• Can a new perfume brand really launch without paying for tooling? Yes, on the library route. JinDi states that selecting from its library of classic public moulds lets a new brand avoid tooling cost entirely at launch. You still pay for the parts, the finish and the decoration, and differentiation then comes from plating, colour, bottle decoration and the box rather than from the shape.
• How long does a JinDi sample take? JinDi states a physical sample of cap, bottle and box in 15 business days, followed by production in 30 to 45 days with inline QC and CMM verification. If your project includes a new private mould, ask for the sample date for your specific parts to be confirmed on the quotation.
• What is the minimum order quantity? MOQ is typically 5,000 to 10,000 pieces for custom components, depending on the specific process. JinDi states it can be negotiated for niche projects through its support programme for emerging brands. Raise it in your first enquiry with realistic volumes.
• Are the cap, bottle and box made in the same factory? The hardware, including the caps, is made in Dizhong's own 10,000㎡ factory in Dongguan. Glass bottles and gift boxes are supplied as part of the same integrated range, so all three arrive as one matched set on one quotation and one invoice, with cap-to-neck fit validated at the mould stage.
• Which shipping terms does JinDi offer? JinDi ships EXW, FOB Shenzhen or Guangzhou, CIF and DDP, with Middle East DDP express supported. Customs documentation is provided: Certificate of Origin, packing list, commercial invoice and export compliance papers.